为了加样方便，Taq 与热启动 Taq DNA 聚合酶均有预混液剂型可供选择。Taq 2X Master Mix 还有 Quick-Load 的形式，可用于直接凝胶上样。Taq PCR 试剂盒包含 Taq DNA 聚合酶、dNTP 混合液、缓冲液、MgCl2 和Quick-Load 2-Log DNA Ladder。

为了加样方便，OneTaq DNA 聚合酶与 OneTaq 热启动 DNA 聚合酶均有预混液剂型。预混液有标准或 GC 缓冲液可供选择，High GC Enhancer 随 GC 缓冲液一同提供。此外这些预混液还有 Quick-Load 的形式，可用于直接凝胶上样。

为了加样方便，OneTaq DNA 聚合酶与 OneTaq 热启动 DNA 聚合酶均有预混液剂型。预混液有标准或 GC 缓冲液可供选择，High GC Enhancer 随 GC 缓冲液一同提供。此外这些预混液还有 Quick-Load 的形式，可用于直接凝胶上样。

为了加样方便，OneTaq DNA 聚合酶与 OneTaq 热启动 DNA 聚合酶均有预混液剂型。预混液有标准或 GC 缓冲液可供选择，High GC Enhancer 随 GC 缓冲液一同提供。此外这些预混液还有 Quick-Load 的形式，可用于直接凝胶上样。

为了加样方便，OneTaq DNA 聚合酶与 OneTaq 热启动 DNA 聚合酶均有预混液剂型。预混液有标准或 GC 缓冲液可供选择，High GC Enhancer 随 GC 缓冲液一同提供。此外这些预混液还有 Quick-Load 的形式，可用于直接凝胶上样。

超高的性价比、引人注目的商业宣传，NEB 的热启动 Taq 是分子诊断和其它应用的理想选择。与化学修饰或基于抗体结合的热启动聚合酶不同，NEB 的热启动 Taq 利用一种基于核酸适配体（aptamer）技术。这种独特的核酸适配体通过非共价键作用与聚合酶结合，从而抑制聚合酶在非许可温度下的聚合反应。这种新方法不需要激活步骤，减少样品降解的可能性、缩短整个反应时间。

OneTaq 热启动 DNA 聚合酶利用核酸适配体（aptamer）作为抑制剂，不仅使用方便，而且减少了引物二聚体和其他次级产物对反应的干扰。这种核酸适配体抑制剂能够与聚合酶发生可逆结合，当温度低于 45℃ 时抑制聚合酶活性，因而能够在室温下建立反应。在正常的热循环条件下 OneTaq 热启动 DNA 聚合酶即能被激活，无需额外的高温启动步骤。因此 OneTaq 热启动 DNA 聚合酶能够替换常规的或现有的基于 Taq DNA 聚合酶的 PCR 反应。

LongAmp 热启动 Taq DNA 聚合酶利用了一种特定合成的核酸适配体，它能够与酶可逆结合，当温度低于45℃ 时抑制聚合酶活性，正常的热循环条件下释放聚合酶。

为了加样方便，LongAmp Taq 与 LongAmp 热启动 Taq DNA 聚合酶均有预混液剂型可供选择。LongAmp Taq PCR 试剂盒包含 LongAmp Taq DNA 聚合酶（2,500 units/ml）、dNTP 混合液（10 mM）、LongAmp Taq 反应缓冲液套装（5X）、LongAmp Taq 的反应缓冲液套装（不含镁离子）、MgSO4（100 mM）和无核酸酶污染的水。

为了加样方便，Taq 与热启动 Taq DNA 聚合酶均有预混液剂型可供选择。Taq 2X Master Mix 还有 Quick-Load 的形式，可用于直接凝胶上样。Taq PCR 试剂盒包含 Taq DNA 聚合酶、dNTP 混合液、缓冲液、MgCl2 和Quick-Load 2-Log DNA Ladder。

超高的性价比、引人注目的商业宣传，NEB 的热启动 Taq 是分子诊断和其它应用的理想选择。与化学修饰或基于抗体结合的热启动聚合酶不同，NEB 的热启动 Taq 利用一种基于核酸适配体（aptamer）技术。这种独特的核酸适配体通过非共价键作用与聚合酶结合，从而抑制聚合酶在非许可温度下的聚合反应。这种新方法不需要激活步骤，减少样品降解的可能性、缩短整个反应时间。

为了加样方便，OneTaq DNA 聚合酶与 OneTaq 热启动 DNA 聚合酶均有预混液剂型。预混液有标准或 GC 缓冲液可供选择，High GC Enhancer 随 GC 缓冲液一同提供。此外这些预混液还有 Quick-Load 的形式，可用于直接凝胶上样。

为了加样方便，OneTaq DNA 聚合酶与 OneTaq 热启动 DNA 聚合酶均有预混液剂型。预混液有标准或 GC 缓冲液可供选择，High GC Enhancer 随 GC 缓冲液一同提供。此外这些预混液还有 Quick-Load 的形式，可用于直接凝胶上样。

为了加样方便，OneTaq DNA 聚合酶与 OneTaq 热启动 DNA 聚合酶均有预混液剂型。预混液有标准或 GC 缓冲液可供选择，High GC Enhancer 随 GC 缓冲液一同提供。此外这些预混液还有 Quick-Load 的形式，可用于直接凝胶上样。

为了加样方便，OneTaq DNA 聚合酶与 OneTaq 热启动 DNA 聚合酶均有预混液剂型。预混液有标准或 GC 缓冲液可供选择，High GC Enhancer 随 GC 缓冲液一同提供。此外这些预混液还有 Quick-Load 的形式，可用于直接凝胶上样。

OneTaq 热启动 DNA 聚合酶利用核酸适配体（aptamer）作为抑制剂，不仅使用方便，而且减少了引物二聚体和其他次级产物对反应的干扰。这种核酸适配体抑制剂能够与聚合酶发生可逆结合，当温度低于 45℃ 时抑制聚合酶活性，因而能够在室温下建立反应。在正常的热循环条件下 OneTaq 热启动 DNA 聚合酶即能被激活，无需额外的高温启动步骤。因此 OneTaq 热启动 DNA 聚合酶能够替换常规的或现有的基于 Taq DNA 聚合酶的 PCR 反应。

LongAmp 热启动 Taq DNA 聚合酶利用了一种特定合成的核酸适配体，它能够与酶可逆结合，当温度低于45℃ 时抑制聚合酶活性，正常的热循环条件下释放聚合酶。

为了加样方便，LongAmp Taq 与 LongAmp 热启动 Taq DNA 聚合酶均有预混液剂型可供选择。LongAmp Taq PCR 试剂盒包含 LongAmp Taq DNA 聚合酶（2,500 units/ml）、dNTP 混合液（10 mM）、LongAmp Taq 反应缓冲液套装（5X）、LongAmp Taq 的反应缓冲液套装（不含镁离子）、MgSO4（100 mM）和无核酸酶污染的水。

OneTaq 热启动 DNA 聚合酶利用核酸适配体（aptamer）作为抑制剂，不仅使用方便，而且减少了引物二聚体和其他次级产物对反应的干扰。这种核酸适配体抑制剂能够与聚合酶发生可逆结合，当温度低于 45℃ 时抑制聚合酶活性，因而能够在室温下建立反应。在正常的热循环条件下 OneTaq 热启动 DNA 聚合酶即能被激活，无需额外的高温启动步骤。因此 OneTaq 热启动 DNA 聚合酶能够替换常规的或现有的基于 Taq DNA 聚合酶的 PCR 反应。

Biotechrabbit 2X 多重热启动PCR mix适用于多重终点PCR ，独特优化的缓冲液组成，单次反应可实现10种以上的靶标在50bp 至2kb快速扩增，目前已有测试到560重以上，是超多重PCR的理想选择。Mix中包含Enhangcers可有效扩增低丰度和高GC含量模板优化mix帮助快速建立反应。
特点：
专用性：配方经过优化，以达到超多重PCR最佳效果；
热启动：高灵敏度和特异性；
通用性：在多种多重模板表现良好。

biotechrabbit™ Multiplex PCR Master Mix is a perfect choice for endpoint multiplex PCR. The unique buffer composition is optimized for robust simultaneous amplification of 10 or more targets from 50 bp – 2 kb in a single reaction. The Master Mix contains pure biotechrabbit Hot Start Taq DNA Polymerase, extremely high-quality dNTPs and optimized Multiplex PCR buffer; thus, only template, PCR primers and PCR-grade water are added. The enhancers included in the mix enable efficient amplification of low abundant or GC-rich templates. Hot Start Taq DNA Polymerase is inactive during reaction setup due to the bound antibody, which is quickly released at elevated temperatures, ensuring the enzyme is active only during PCR. The hot-start efficiently minimizes primer–dimers and mispriming.

biotechrabbit ApStarTaq™ DNA Polymerase is an aptamer based hot-start enzyme and the first-choice for fast PCR reactions. The exceptional quality and purity of the enzyme ensures highest performance, suitable for standard and fast PCR cycling in both, endpoint and real-time assays. It ensures high product yields with low background and without primer–dimer formation or non-specific priming. The aptamer binds to Taq DNA Polymerase and inhibits the enzyme activity at temperatures below 45°C. This ensures full hot-start functionality. The enzyme is released during standard PCR cycling conditions. There is no need for separate heating or denaturation steps, allowing fast PCR reactions.

biotechrabbit™ YourTaq Hot Start DNA Polymerase is optimized for high yield of amplification of 0.1–3 kb DNA targets, even from low copy number. The enzyme shows excellent PCR specificity and sensitivity for a broad range of amplicons. YourTaq Hot Start DNA Polymerase is resistant to PCR inhibitors, such as blood (up to 20%), Ethanol or humic acid enabling PCR amplification from DNA templates with carry-over of PCR-inhibitors. YourTaq Hot Start DNA Polymerase is a highly pure enzyme. Together with the optimized buffer and high-quality dNTPs (BR0600202) a mix is achieved for the most demanding PCR applications. In addition, the enzyme is suitable for amplification of GC-rich templates (up to 70%) pairing with 5× PCR Enhancer (BR1900201).

biotechrabbit™ Hot Start Taq DNA Polymerase is a first-choice hot-start PCR enzyme for all demanding PCR applications. The enzyme ensures high product yields with low background and without primer–dimer formation and nonspecific priming. The Hot Start Taq DNA Polymerase is inactive during reaction setup due to the bound antibody which is quickly released at elevated temperatures, ensuring the enzyme is active only during PCR. There is no need for prolonged heating or denaturation steps. The optional use of 5× PCR Enhancer improves PCR results in many cases, including impure template or low template abundance.

biotechrabbit™ YourTaq Hot Start PCR Mix is optimized for high yield of amplification of 0.1–3 kb DNA targets, even from low copy number. The mix shows excellent PCR specificity and sensitivity for a broad range of amplicons. YourTaq Hot Start PCR Mix is resistant to PCR inhibitors, such as blood (up to 20%), Ethanol or humic acid enabling PCR amplification from DNA templates with carry-over of PCR-inhibitors. The 2× YourTaq Hot Start PCR Mix contains pure biotechrabbit YourTaq Hot Start DNA Polymerase, extremely high-quality dNTPs and optimized PCR buffer; thus, only template, PCR primers and PCR-grade water are added. In addition, the mix is suitable for amplification of GC-rich templates (up to 70%) pairing with 5× PCR Enhancer (BR1900201).

biotechrabbit™ YourTaq Direct-Load Hot Start PCR Mix is optimized for high yield of amplification of 0.1–3 kb DNA targets, even from low copy number. YourTaq Hot Start PCR Mix shows excellent PCR specificity and sensitivity for a broad range of amplicons. The mix is resistant to PCR inhibitors, such as blood (up to 20%), Ethanol or humic acid enabling PCR amplification from DNA templates with carry-over of PCR-inhibitors. The 2× YourTaq Direct-Load Hot Start PCR Mix contains pure biotechrabbit YourTaq Hot Start DNA Polymerase, extremely high-quality dNTPs, two dyes (blue and yellow) that separate during electrophoresis, allowing migration progress to be monitored, and sufficient buffer density for direct loading onto agarose gels. In addition, the mix is suitable for amplification of GC-rich templates (up to 70%) pairing with 5× PCR Enhancer (BR1900201).

biotechrabbit™ YourTaq Hot Start DNA Polymerase is optimized for high yield of amplification of 0.1–3 kb DNA targets, even from low copy number. The enzyme shows excellent PCR specificity and sensitivity for a broad range of amplicons. YourTaq Hot Start DNA Polymerase is resistant to PCR inhibitors, such as blood (up to 20%), Ethanol or humic acid enabling PCR amplification from DNA templates with carry-over of PCR-inhibitors. YourTaq Hot Start DNA Polymerase is a highly pure enzyme. Together with the optimized buffer and high-quality dNTPs (BR0600202) a mix is achieved for the most demanding PCR applications. In addition, the enzyme is suitable for amplification of GC-rich templates (up to 70%) pairing with 5× PCR Enhancer (BR1900201).

Biotechrabbit 2X 多重热启动PCR mix适用于多重终点PCR ，独特优化的缓冲液组成，单次反应可实现10种以上的靶标在50bp 至2kb快速扩增，目前已有测试到561重以上，是超多重PCR的理想选择。Mix中包含Enhangcers可有效扩增低丰度和高GC含量模板优化mix帮助快速建立反应。
特点：
专用性：配方经过优化，以达到超多重PCR最佳效果；
热启动：高灵敏度和特异性；
通用性：在多种多重模板表现良好。

biotechrabbit™ Multiplex PCR Master Mix is a perfect choice for endpoint multiplex PCR. The unique buffer composition is optimized for robust simultaneous amplification of 10 or more targets from 50 bp – 2 kb in a single reaction. The Master Mix contains pure biotechrabbit Hot Start Taq DNA Polymerase, extremely high-quality dNTPs and optimized Multiplex PCR buffer; thus, only template, PCR primers and PCR-grade water are added. The enhancers included in the mix enable efficient amplification of low abundant or GC-rich templates. Hot Start Taq DNA Polymerase is inactive during reaction setup due to the bound antibody, which is quickly released at elevated temperatures, ensuring the enzyme is active only during PCR. The hot-start efficiently minimizes primer–dimers and mispriming.

biotechrabbit ApStarTaq™ DNA Polymerase is an aptamer based hot-start enzyme and the first-choice for fast PCR reactions. The exceptional quality and purity of the enzyme ensures highest performance, suitable for standard and fast PCR cycling in both, endpoint and real-time assays. It ensures high product yields with low background and without primer–dimer formation or non-specific priming. The aptamer binds to Taq DNA Polymerase and inhibits the enzyme activity at temperatures below 45°C. This ensures full hot-start functionality. The enzyme is released during standard PCR cycling conditions. There is no need for separate heating or denaturation steps, allowing fast PCR reactions.

biotechrabbit™ Hot Start Taq DNA Polymerase is a first-choice hot-start PCR enzyme for all demanding PCR applications. The enzyme ensures high product yields with low background and without primer–dimer formation and nonspecific priming. The Hot Start Taq DNA Polymerase is inactive during reaction setup due to the bound antibody which is quickly released at elevated temperatures, ensuring the enzyme is active only during PCR. There is no need for prolonged heating or denaturation steps. The optional use of 5× PCR Enhancer improves PCR results in many cases, including impure template or low template abundance.

biotechrabbit™ YourTaq Hot Start PCR Mix is optimized for high yield of amplification of 0.1–3 kb DNA targets, even from low copy number. The mix shows excellent PCR specificity and sensitivity for a broad range of amplicons. YourTaq Hot Start PCR Mix is resistant to PCR inhibitors, such as blood (up to 20%), Ethanol or humic acid enabling PCR amplification from DNA templates with carry-over of PCR-inhibitors. The 2× YourTaq Hot Start PCR Mix contains pure biotechrabbit YourTaq Hot Start DNA Polymerase, extremely high-quality dNTPs and optimized PCR buffer; thus, only template, PCR primers and PCR-grade water are added. In addition, the mix is suitable for amplification of GC-rich templates (up to 70%) pairing with 5× PCR Enhancer (BR1900201).